Problem with ePDU
Just installed our new Eaton ePDU G3 over the weekend. The install went well apart from a struggle to get the mounting brackets on (just needed two strong hands, but I only have weak ones!) and locking...
View ArticleDell DLA3000RM2U RBC43 battery wiring diagram
I bought a used ups without batteries. The unit came with the interconnecting cables for the batteries but no diagram. I've googled and did not find a wiring diagram. can anyone share a picture or...
View Articlelooking for small wall mount ups
I've been looking for a small ups that i can mount on a wall next to a network switch that also has a network socket so i can remotely see power events - any suggestions?it will be used more for...
View ArticleAPC Smart-UPS no power
A few weeks back we had a power surge that sent a rack mount UPS offline. We could not get it back online. Replaced with a new one once it came in from order. UPS did not have a warranty on it any...
View ArticleEaton IPM 1.50 and vCenter Appliance 6 Web Client
IPM 1.50 and vCenter Server Appliance 6.0 integration into the Web Client seems to be broken guys?Getting the error attached.AFAIK IPM 1.50 appliance supports vCenter 6?
View ArticleLooking for all day battery backup
I have implemented several APC BR1500G units to keep our stores up and running in the event of a power outage. However, these only work for about an hour, typically. My boss wants us to have a...
View ArticleAPC UPS Pro 1500, Single USB multiple Device
Hello Community,I am thinking to purchase APC UPS Pro 1500, this unit will supply power for 2 NAS and 1 Desktop. This is not a SMART UPS so it doesn't have Network Management Card slot and only has 1...
View ArticleRecommendations for a UPS for PC's
I'm looking for suggestions as to what to use for a UPS for PC's that can monitor if the power goes out and will shut the PC down after a few minutes and also be centrally managed and monitored....
View ArticleUPS Confusion - ESXi
Hi AllI've got a couple of clients running ESXi setups, all are quite different but all have the same need: UPS shutdown. I've done a fair bit of reading on the subject and from what I can see the...
View ArticleChoosing Ups
hey there, so i want to buy a UPS for my PCand i have questions :1 - can i load over power watts(eg :t i have a 500 watt UPS and i want to plug in 600 watt devices )2 - using UPS AT maximum power watts...
View ArticleUPS for 2 dell r710s and some switches. What gives longest run time?
Hello all, I hope this section also counts for battery backup? I have been looking at tons of different options for UPS, and of course there are the watts, VA ratings, and amount of batteries you...
View ArticleEaton UPS
We have a small rack implementation in an off-site office that we're setting up for which we need a UPS solution. We use various APC models in our main facility, and they do alright, but the battery...
View ArticleNeed some tips on replacing a UPS onto a server rack!
Hi all,Our company recently had to replace a defective APC unit (with a battery pack) andsince it's my first time replacing a huge UPS unit like this, I would like to ask few tips on how to replace or...
View ArticleVmware ESXi with APC PowerChute Network Setup
I got a Vmware ESXi v5.5 server running 3 x2012R2 VM's and I got a APC SmartNET 1500 UPS with the Network interface card installed. I want the battery to shutdown my VMs and server after the battery...
View ArticleClik here to view.
Can my APC UPS handle more equipment if I add a battery pack to it?
I can see the battery itself is already pretty low on time it can remain on with the current amount of devices plugged into it. I noticed I can buy battery packs for it vs adding a entire second APC...
View ArticleTrippLite SNMPWEBCARD
Has anyone been able to get these things to send alerts? The first one I received for my comms room UPS was DOA. The replacement flakes out and goes off network constantly and does not send alerts or...
View ArticleEaton IPP not seeing my UPSes, but IPM does and I can browse to it
Everything was working fine until I changed some servers around, moving my DHCP server and DNS server.I have two 5PXs, I can browse to both with no problem. In IPM (on my machine) I can see my IPP...
View Articleups setup
I am setting up an new server room with 3 hosts. what's the best practice for choosing and setting up ups?
View ArticleAPC Netbotz Monitoring 200
Please help on how to logging to the device I've already put a RS232 but still i can't gettin to the device...
View ArticleServer won't boot with UPS connected
Hi AllI have a client with an on premise server and shockingly enough had never had a UPS before. After multiple power outages and several periods of downtime due to issues afterwards I talked them...
View Article