Hi All
I have a client with an on premise server and shockingly enough had never had a UPS before. After multiple power outages and several periods of downtime due to issues afterwards I talked them into getting a new Eaton USB UPS. Install went fine up until rebooting the server. On the second or third POST screen the server gets stuck, hangs for about 2 or 3 minutes then reboots only to get stuck again. If the USB is disconnected, no issues, server boots fine and happily accepts the UPS.
The server is a Leader brand with a S2600 Intel server motherboard, I've updated all the drivers and firmware I can get my hands on and tried several different combinations of USB settings in the BIOS. Any ideas? The screen reads (and I'm paraphrasing):
Copyright 2009-2013 Intel corporation
Version 2.14.1219 copyright American Megatrends
Looks like BIOS...