Eaton IPM changed password on a 5PX UPS Device
Hi,I had to reinstall Eaton IPM and when I configured it to my 5PX UPS Device it seemed to have changed my password.First I added the user name and password through "Settings > Auto Discovery >...
View ArticlePowerChute Network Shutdown - enable SNMP?
I'm just installing PowerChute Network Shutdown 4.2.0 for the first time and looking for some help installing and configuring it to shut down are servers during power events.During the install it asks...
View ArticleUPS Software
Greetings.I would like to know what everybody is using for their UPS software.We are looking at purchasing either APC's SMX2000RMLV2UNC or TrippLite's SMART2200RM2UN.Our main requirements are:Ability...
View ArticleWhen to retire UPS units?
We had a UPS fail around a week ago, battery was junk caused UPS to fail. UPS is a tripplite 2200 model, uses the old sine wave output, newer ones are probably more efficient than this I would think....
View ArticleUPS kVa for 30mins
HiI have network switches with power consumption total of 2694W.What is the kVA of UPS that is required for 30minutes?Thanks
View ArticleGuidance on Power Backup / Power Conditioning Solutions
We are a manufacturer with automation systems in place for some of our production lines. We experience temporary power outages and 'dips' often which cause havoc on our automation lines, causing...
View ArticleProper Use of UPS Units
Hello,I switch off the button of the UPS unit DEXP EURO after turning off the computer. But the UPS unit is still connected to electricity and can emit a single clicking sound 30 minutes after the...
View ArticleEaton 5PX 1000 - I'm lost.... unusable right now.
So I bought a 5PX 1000 with an additional EBM at the advice mostly from Mike(Eaton) in this...
View ArticleBackup ups xs 1300 question
We're using backup UPS XS 1300 in our office as a power backup for the office computer & the security board. This...
View ArticleFans and beeping on Eaton UPSes.
To be specific, I'm talking about5E2000iUSB. There are not many options of UPS in my country. I decided to go with this model, but can't find much info about it on the internet. One thing I read couple...
View ArticleSymmetra 40K runtime calibration
Hi all,A question regarding run time calibration on theAPC Symmetra 40K UPS.We have a good number of these in operation, and on a recent switch over to UPS power during some maintenance works, we have...
View ArticleWhat to use to reboot a device on ping loss
We're looking for a device to cycle power on ping loss or remotely. I've used devices like this one https://dlidirect.com/products/ethernet-power-controller-5and this one...
View ArticleDesktop Rejects UPS?
This has been baffling me for the better part of the day. There seems to be a machine that is rejecting a UPS when plugged into one. I have only been able to get it to boot today when it has been...
View ArticleUpgrade APC Firmware - AP7921 Switched Rack PDU
Evening Everyone,I have acquired an APC Switched Rack PDU AP7921 . I am using it in my home lab setup. I have noticed that it is running an older version of the firmware. Can someone run me through the...
View ArticleEaton 9140 Ups Stanby Problem
Hello All,We are using Eaton 9140 Ups in Tomography System. While ups is online - working -suddenly ups mode is changing to Standby and cutting output power voltage. Sometimes this problem is happening...
View ArticlePlug my UPS into PDU
Ok so this question has a lot of threads on a lot of forums but it never actually gets answered. The answers always say you should plug the UPS directly into the wall but I need to know if it actually...
View ArticleWhat voltage UPS is sufficient for 2x 550W power supplies?
Got 2x Dell PowerEdge R430's with dual 550w power supplies in each. I will only use one power supply per server on the battery back-up. The redundant supplies will just be surge protected. I may or may...
View ArticleSURTD3000XLT + AP9626 in United States
Hey! Thank you for checking this out.I just got my hands on a second-hand SURTD3000XLT. I want to use this in my server rack in my home. My electrical panel allows me to use two (120v) rails in order...
View ArticleEaton 5E2000iusb - Really slow charging, loud fans
I found the UPS with fans running when I came home today. Then I noticed it was saying 75% battery left in my computer which the UPS is connected to. When there is a power outage on my house, I can...
View ArticleAPC smart UPS 2200
I have a APC smart UPS 2200. I do i reset the password to its default
View Article