HI All,
I have a tripp lite snmpwebcard that got in recovery mode while I was upgradingit's firmware. Allhad gone well for the first 2 cards I had to update, but on the last one, I lost connection after the reboot following theftp firmware upload.
Now when I boot itconnected to serial port, I get the following:
The SNMPWEBCARD is now in recovery mode. You will be prompted for network
information so that you can download a boot rescue image and given an opportunity
to clear the configuration and file system. All address are expressed as unsigned
longs. For example the address 10.2.0.44 would be entered as 0A02002C. The Leading
zeroes and use of uppercase are required. If all else fails,
call Tripp Lite at 1-773-869-1111
Serial Number: Invalid S/N MAC address: 00:40:9D:43:35:97
The first two words of the SHA256 sum of the valid recovery file for...