Hello, following a bad manipulation by wanting to change the protocol from V2 to V3 and change the default password 12345678 of my Schneider APVS9601 snmp card, as prescribed by the manufacturer, I forgot the password that I have Between. the card is mounted on an APC SRV S 6KI UPS. The card does not have a reset button, but an ethernet port and temperature sensor port I made a mistake by connecting a cable to this sensor port to reset with PUTTY, which gave me an error code on the inverter. The factory inverter has a usb input for information to a pc and a serial port. What is the procedure with PUTTY or other to reset the password. Thanks for your help, I need it.
Best regards